Hammer A3-31 - Help me eliminate snipe

[ChrisA Edwards]

Thank You Lance.

[Frank Drackman]

That is a great article. I have the grizzly 12" J/P with a slight bit of Snipes on the leading edge. Haven't done anything about it but your article made me change my mind.

[Lance Conry]

Excellent article Lance!

Thanks Sebastian. That was the first time I’ve made a video to support a blog article (I’ve got a general, but rather eclectic blog too), and being able to take screen shots for the images made it very easy!

That is a great article. I have the grizzly 12" J/P with a slight bit of Snipes on the leading edge. Haven't done anything about it but your article made me change my mind.

Good luck, I’m glad it has managed to help one person.

[Martin Serre]

Hey Edwin,

If you ever have any trouble again with your machine reach out to me here; I'll be glad to help you out and make sure you're well taken care of.

https://sawmillcreek.org/showthread....ort&highlight=

All the best

I'm having the same trouble and would like to adjust the tension on my rollers... is it possible to repost the video as the link doesn't seem to work anymore.

Regards from the North

[Martin Serre]

https://txbonds.zenfolio.com/p90543695/ec17054f1

check out this video Felder sent me to help adjust roller tension. Got mine worked out doing this with some trial and error.

Having same problem ... is it possible to repost video as the link doesn't seem to work.

Thank you,

[ChrisA Edwards]

Was this the one?

[Greg Parrish]

Sorry, I closed my zenfolio account recently.