Results 1 to 8 of 8

Thread: Hook and loop on Supermax

  1. #1
    Join Date
    Mar 2005
    Location
    Cashiers NC
    Posts
    318

    Hook and loop on Supermax

    I just bought a new SuperMax drum sander. I have a bunch of hook and loop rolls left from my old sander. Can I cut these and use them on the SuperMax. Has anyone of you done this?
    Charlie Jones

  2. #2
    Join Date
    Mar 2006
    Location
    SoCal
    Posts
    19,667
    I imagine you could but, why? Supermax went to a lot of trouble to make that drum true. I would not want to convert it to a spongy surface or pay the premium for H&L abrasives. The ease of paper changes is one of the things that led me to the 19-38. Is your model not easy to change paper on? Do you have a lifetime supply of 3" wide H&L rolls? I'm just curious about the compelling reason to modify. Maybe I'm missing something . You could apply it and remove it if it didn't work out. Just use an adhesive that you can clean off (which is most of them).
    Buy a man a plane ticket and he’ll fly for a day.
    Push a man out of a plane
    and he’ll fly for the rest of his life.

  3. #3
    Join Date
    Mar 2005
    Location
    Cashiers NC
    Posts
    318
    Maybe I wasn’t clear. I will not convert the drum. I would cut the paper to fit and use up the hook and loop stuff I already have.
    Charlie Jones

  4. #4
    Join Date
    May 2009
    Location
    Wenatchee. Wa
    Posts
    230
    It will work if you can get the thicker h&l paper to go into the latching mechanism, but the paper will be "soft" on the drum and the edges of you workpiece will end up slightly beveled and the board would sand unevenly as the paper would accomadate the vary hardness of the wood surface.

  5. #5
    Join Date
    Mar 2005
    Location
    Cashiers NC
    Posts
    318
    Thanks Guys. I think I will use these rolls for hand sanding and buy the pre cuts for the Supermax. This is a fine machine and I wouldn’t want to mess it or the wood up. This is a great forum.
    Charlie Jones

  6. #6
    Join Date
    Jun 2008
    Location
    Huntsville, AL
    Posts
    1,226
    Don't buy the pre-cuts (too expensive). Buy the pre-marked rolls. See Klingspor woodworking site. I love this product, just pull the roll out of box (like toilet paper), find the colored mark that corresponds to your sander, cut and ur done.

  7. #7
    Join Date
    Mar 2005
    Location
    Cashiers NC
    Posts
    318
    Thanks Mike. I will check them out.
    Charlie Jones

  8. #8
    Join Date
    Oct 2013
    Location
    Northwest Indiana
    Posts
    494
    While on Klingspor's site, take a look at their "bargain box" deals--especially if you do any turning. I bought a 20 pound assortment a few years ago for $35, split off a supply for a fellow turner and still have a lifetime assortment of 150-500 grit for small work. Assorted widths and types--but all first class abrasives. Makes it easy to make custom one-off sanding blocks as well. Most of my flat work is still sanded with matched sets, but this assortment is just one of those neat things to have around.
    earl

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •