I picked up this 26" hand saw with Warranted Superior Medallion for $5. It had a LOT wrong with it and I think I overpaid for $5. But what was done was done so I went to work. Here's the saw as I got it:
0110191422.jpg0110191422a.jpg
As you can see it was very rusted, the finish on the handle was pretty much gone, there was one crack that went all the way through the handle and many other smaller surface cracks, there was also a saw screw missing from the handle (the saw nut was still there on the opposing side though, and the saw plate had a bit of a bend near the tip.
Here it is disassembled:
0110191426.jpg
And here I'm removing rust with Windex and sandpaper:
0110191911.jpg0110191914.jpg
After that, I went to work on the handle. I saw that scraping with a razor blade might be possible - I couldn't get it work well, though, so just sanded it clean:
0111191424.jpg0111191424a.jpg0111191424b.jpg
Love the wood in that handle - I think it's beech, right?