Incra TS LS with Shop Fox W1677

[Tom Yip]

Hi All! Wanted to see if anyone has a Shop Fox W1677 table saw with Incra TS LS fence system. I'm considering buying the Incra but I'm not sure if the back rail will interfere with the blade splitter, and has to be cut in half to make everything work.
1.png2.jpg

The other way to ask this question is.. what is the total depth of the back rail when it's mounted on the table? If I have this I can take this measurement against my existing setup and find out. Appreciate your help!

2.jpg

[Earl McLain]

A quick measure (at -16 f in the garage) shows it at 3 3/8" from edge of table to outside of extrusion. The extrusion would be easy to cut if you have to.
earl

[Tom Yip]

Thank you Earl!