My KF700 is capable of taking a dado stack(less than 3/4", i think) or a slot cutter. I never felt compelled to fork over $400-500 for a dado set, but now i find myself with a spare 8" dado king with 5/8" bore. I sold my 10" saw, and purchased a used 10" dado king set with a 1" bore off the classifieds here for my PM72. Is there a compelling reason to spend $100+/- to have my 8" set bored to 30mm with the pins, or will i never use it? Im thinking it would be useful to have for doing dadoes in case sides, but this is also something i can do with minor setup using my of2200 and a track. Im leaning towards selling the 8" set, but wanted to double check im not missing something with a slider and running a dado head.