Router bits for dovetails

[jeff oldham]

Can anyone tell me of a good place to buy the router bits for the keller jig..the straight bit is 5/8 with a bearing on top and the other one is a 7 degree bit with a bearing on top

[Jim Colombo]

I get mine from Keller

Jim

[Edwin Santos]

Hi,
The Keller jig is great.
If you choose not to get the bits from Keller, then the next two options I would suggest is to get them from Whiteside (who makes them for Keller) or you can get the ones made by Amana from Toolstoday.

Don't hold me to this, but I "think" CMT has bits in their line that meet the Keller specifications if you want a fourth alternative.
Edwin

[Jamie Buxton]

Surprisingly, you can just search for Keller bits (or Leigh bits) without having to know sizes and angles and such. The major suppliers know what those jigs want, and make bits specifically for that purpose.