Please see the image i have drawn...

My workshop is a 30x46 climate controlled room built within a 40x60 pole shed.

I want to put my dust collector on the outside of the room against the wall and using "through the wall connections) run some piping in the workshop area so i can simply pull my tools from against the wall to the middle of the room and use them when needed. My ceiling height is 16 feet high.

When I am not woodworking i would pull the dust collector back into the climate controlled room to avoid moisture from the shed when it sweats.

My questions are:

Is this to much pipe for a single 1100CFM dust collector -I use only one tool at a time. Blast gates are shut on all other tools when using them

Do i want to run the PCV piping along the floor, 4 feet up from the floor, overhead etc....

Thanks

D

001.jpg