This is probably a silly question and will show me as a newbie but I have purchased a new PM 1000 table saw which arrived today. I unpacked everything and set it out in a systematic fashion prior to assembly. I took the manual inside to read some directions and the very first part required me to unscrew the cabinet from there pallet "FROM THE BOTTOM." The only way I see to access these screws would be to lay the cabinet down on a side and take the screws out and then set it up again. The cabinet, contains the motor and main table, is too heavy for me to lift even to lay it down and I know I wouldn't be able to stand it back up. I guess I need to get some help but this seems to be a bad packaging situation.
Stu