I have one 2 or 3 years old. When I try to use it, it shows a paper jam message and will not print.
Does anyone know what this is all about? It is also a copier as well as printer.
I have one 2 or 3 years old. When I try to use it, it shows a paper jam message and will not print.
Does anyone know what this is all about? It is also a copier as well as printer.
Possibly a small piece of paper or dirt on the jam sensor?
Note: When I search the HP website for a repair manual it says it no longer supports that model because it's over 10 years old?
Last edited by Barry McFadden; 01-10-2019 at 8:31 AM.
Are you referring to your manual for troubleshooting? With some printers, there are more than one access panel/door that you may have missed. And with some printers, it needs to see all the access panels opened and closed to resolve the paper jam even though you probably cleared the jam.
I can't also find a manual with regards to the paper jam issue, try to contact HP support maybe they can give you an instruction on how to solve the issue.
Are you by any chance trying to feed a single sheet of paper (e.g. to print one photo)? GF's Canon has the same symptom: it really doesn't like feeding with less than 1/8" or so of paper in the tray.
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
I have resolved the issue.
I had a jamb, tried to clear it, but only knew of one door.
After I found the second door in back side of the printer, opened it, found a piece of paper in it,
and voila, it was fixed.
You do know that old dogs can be slow on the uptake. Old age sure beats the alternative though.
Last edited by lowell holmes; 01-15-2019 at 3:28 PM.
The annoying ones are when there are multiple doors and the printer's firmware won't clear the error code until you open and close all of them, regardless of where the jam is actually located. My old multi-function machine would always jam at the same easily-accessible spot, but I always had to pull it out from the wall to open a normally unused door before it would continue printing.
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
Maybe this string will help some body with a similar problem.
In the future, I will always look for a second door.
By the way,my printer is really a good one, and I am happy with it.
Old sleepy dogs tend to live in a fog and must remember to stay sharp.
Last edited by lowell holmes; 01-15-2019 at 3:41 PM.