Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19

Thread: Best ways to remove glue from clamps

  1. #16
    Join Date
    Mar 2016
    Location
    Florida
    Posts
    927
    I sometimes used to put painters tape down on my Dubuque clamps and it helps but it’s a pain as you have to get the tape size pretty close. Once I started using less glue and a silicone roller though I don’t have as much trouble. I just scrape or peel the glue that causes issues usually.

  2. #17
    Join Date
    Apr 2008
    Location
    East Virginia
    Posts
    602
    Quote Originally Posted by Prashun Patel View Post
    Strike the glue drips with a mallet. They will pop off
    That's what I do, too. Back in the '70s when we used to use Elmer's Glue-All, pieces of the broken-off glue flew like bullets. Now with Titebond II, not so much...

  3. #18
    Join Date
    May 2008
    Location
    MA
    Posts
    1,485
    Quote Originally Posted by Greg Parrish View Post
    Once I started using less glue and a silicone roller though I don’t have as much trouble.
    Do you have a particular glue roller you recommend? I always wondered if they were worth the hassle (would certainly keep my finger cleaner...)

  4. #19
    Join Date
    Mar 2015
    Location
    San Benito, TX
    Posts
    48
    Chain them to the back of the truck and drive down a few miles of gravel road.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •