I built this box out of 1/4" hard board, to hold some knife sharpening stones. Now I need a way to lift this relatively heavy, but small box. It measures about 5" x 10" x 6". As you can see, I have some Velcro doing the job right now, however I'd like to have something a bit more elegant for the permanent solution.
Stipulations are, there can be nothing protruding into the box and I'd like to have the strap removable. Also, when in use, the box sits on 4 small pads on one end, as you can see in the pic. I know someone here will have the solution I've been searching for. Thanks for the help!