I just wanted to share another option that is less expensive than the Felder options and less expensive than many of the Amana options too. No doubt a product of the "direct-from-manufacturer" prices without intermediary parties.
http://whitehill.tools/catalogue/#page=103
I own some if anyone has any questions,
B
They do that sort of work all the time as a matter of course, and the process is seamless. I've had a few things made for me and there will be a bit of back and forth followed by a CAD drawing for your approval and it's off to the custom shop.
I'm really glad they have their insert door head in their latest catalogue because I think it's one of the most versatile insert style options out there. Good for doors up to 33mm thick, infinite panel adjustability between 5-9mm and you can get profiled edge doors and mission/shaker all in one set for way less than seperate. They can also supply custom profiles.
http://whitehill.tools/catalogue/#page=79
B
Anybody know if this dado cutter comes in 1 1/4" bore?
https://www.toolstoday.com/v-11485-6...SABEgJUEvD_BwE
or have opinions on this style of cutter for hobby use?
You can have any set bored to your requirement.
I had an FS tools 6" set bored to 30mm for my saw and shaper. It's a great set as the blades are ground as a set to the exact diameter.
A 4" set may not give you much tool projection beyond the fence, and once the spacers are on a 1 1/4" spindle there won't be a lot of cutting depth.
That said my dado set works great, except it doesn't go small enough for many veneered panels......Rod.
Rod what do you get for depth of cut with your 6'' set ? Also is the FS set two blades and chippers or all blades ?