Results 1 to 5 of 5

Thread: Bosch PS10-2A 1/4" I-Driver 10.8v

  1. #1
    Join Date
    Nov 2016
    Location
    Prescott, AZ
    Posts
    9

    Bosch PS10-2A 1/4" I-Driver 10.8v

    Hello....

    I've had this Bosch screwdriver for a long time and just love it. It finally
    quit working, especially doesn't do reverse anymore thus cannot remove screws.

    Made attempts to have it repaired through online but it seems nobody has any repair facility in having it refurbished. Parts are available but don't know what is missing or doesn't work.

    Can you guys/gals direct me to someone that can refurbish it?

    Thank you

    Achtung: Schlau Holz

  2. #2
    Join Date
    Nov 2016
    Location
    Prescott, AZ
    Posts
    9
    I've found someone that might repair said item at: customerservice@ereplacementparts.com/ Will see what they can do it.
    Regards, ELMER
    Last edited by Bruce Page; 01-07-2019 at 8:20 PM.
    Achtung: Schlau Holz

  3. #3
    I think you'll find the economics not worth it.

    You're going to need a control box ($50 )

    -or- gear assembly ( $ 80 )

    -or- both, and then you're going to pay labor on top of that.

    Then the rest of the tool will still be 10 years old. You can usually pick up an entire kit with new 2.0Ah batteries for around $125, less on ebay. And a bare tool is usually around $75. I've seen those for around $40-$50 in good condition on ebay.

  4. #4
    Join Date
    Nov 2016
    Location
    Prescott, AZ
    Posts
    9
    Thank you, appreciate your input .
    Achtung: Schlau Holz

  5. #5
    Join Date
    Feb 2003
    Location
    Doylestown, PA
    Posts
    5,728
    Bosch does have service centers, I bought a couple Bosch refurbs at one. But yeah, the economics of repair vs. replace.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •