20181222_115243.jpg

Hello

I decided to make another set of Adirondack chairs but this time I used construction grade lumber from Lowes that I milled down.

The person who wants them wanted them to be black. I didn't like how stain took to this wood so I used Krylon Fusion matte black spray paint. It looked great until I added 3 coats of Helmsman spray spar urethane to protect from Arizona sun.

Aside from looking like it has an over spray finish it's now satin and I don't care for it. I'm thinking of putting on another coat of black Krylon as the final coat.

Is this acceptable?