Results 1 to 9 of 9

Thread: to good to be true - useable wood

  1. #1
    Join Date
    Mar 2018
    Location
    Rochester, NY
    Posts
    63

    to good to be true - useable wood

    Sorry for the novice question.

    I had a buddy reach out to me and said he had some hardmaple for me free of charge. (2) 5/4 - 8ft boards air dried for 2 years, nothing extravagant, but I am a self-proclaimedcheap skate. I didn't even look at the boards, just loaded in my car andbrought home. After breaking down they seem to have an excessive amount of wormholes and possible beetle remnants holes (oblong).

    A
    rethese useable or should they go into the burn pile?


    I don't even know how I would put a good finish / look onthese other than them having character.

    Thanks in advance for any tips and input

    Attached Images Attached Images

  2. #2
    Join Date
    Sep 2006
    Location
    Deep South
    Posts
    3,970
    That looks like powder post beetle damage to me. The little critters may still be in there and ready to spread. Kiln drying or certain insecticides will kill them but for that amount and quality of lumber, I think I would just discard them.

  3. #3
    Join Date
    Dec 2012
    Location
    Bedford, NH
    Posts
    1,286
    Character that could haunt you.
    Thoughts entering one's mind need not exit one's mouth!
    As I age my memory fades .... and that's a load off my mind!

    "We Live In The Land Of The Free, Only Because Of The Brave"
    “The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living."
    "
    Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill

  4. #4
    Join Date
    Oct 2007
    Location
    New Hill, NC
    Posts
    2,568
    They are usable but you really ought to sterilize them ASAP in order to ensure that there are not active PPB present in the lumber.

  5. #5
    Join Date
    Feb 2018
    Location
    Thomaston Ga
    Posts
    17
    Would that not be wormy/ Ambrosia maple? If so a friend sales it for 5.25/bf
    IMG_1314.JPG

  6. #6
    No, ambrosia beetles and ppb are not the same. PPB like dry wood, ambrosia beetles bore into softer wet wood. Ambrosia beetles don't chew dry wood because their munchers don't have the strength. PPB munch dry wood and lay eggs that can emerges years later.

  7. #7
    Join Date
    Jan 2007
    Location
    Michiana
    Posts
    3,071
    I bought a whole bunch of soft maple from a local source a few years ago. Once I planed it I found it was infested with Powder Post Beetles. It makes for an interesting "rustic" aesthetic. Find the silver lining.
    Sharp solves all manner of problems.

  8. #8
    Join Date
    Feb 2018
    Location
    Thomaston Ga
    Posts
    17
    When I start cutting my hardwood it will all be treated solubor water solution. Same as bora care just cheaper
    Hugh
    Ezboardwalk Jr
    Ls 3025 tractor
    Polaris Ranger 500 utv
    echo cs 400 18 in cs 590 24 in
    Makita 2030 ( awiting rebuild )
    Hatitich job site table saw
    cutech 2 knife planer

  9. #9
    Join Date
    Oct 2007
    Location
    New Hill, NC
    Posts
    2,568
    Quote Originally Posted by Hugh Turner View Post
    Would that not be wormy/ Ambrosia maple? If so a friend sales it for 5.25/bf
    IMG_1314.JPG
    Those do not appear to be from ambrosia beetles. You can tell the difference between Ambrosia beetle exit holes and Lyctid PPB by closely studying the perimeter of the hold. Ambrosia beetle holes will be stained black around the inside of the hole.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •