Shot glass finish

[Stevan Hopkins]

I am thinking that epoxy would be the only suitable finish for a turned wood shot glass. Thoughts anyone?

[Perry Hilbert Jr]

I am learning more and more about metal spinning. There is a way to press a pewter or thin sliver liner into wooden chalices, cups etc. and then crimp the liner over the rim. I saw only one video so far on doing it. and with the right prep it did not appear to require a rocket science degree.

[JohnC Lucas]

With metal spinning you usually spin the metal onto the outside of a form. You could shape the form like the inside of the shot glass. I haven't seen it done the other way where you push the metal into a form. Not sure that's possible because you would have to stretch the metal too much. A friend who's name escapes me this morning did a series of tests trying to find a finish for wine goblets and shot glasses that would not only be alcohol resisitant but would also not show a stain from the wine and not impart any taste to the wine. The finish he found was to wipe down the inside with several coats of thin CA glue. Then pour melted Carnauba wax into the goblet, let is sit for a few second and then pour it out. let it sit for a few seconds and then wipe out any excess. He tried lots of finishes like epoxy and straight CA and others and this was by far the most superior.

[Prashun Patel]

I made a whisky glass for myself from walnut. Unfinished. Works for me. I burnished the outside, but am treating it like a cooking spoon - no finish.

[Stevan Hopkins]

Thank you John, I will try your friend’s CA & wax method

[mike falconer]

When makeing shot glasses do you calculate the volume to hold an ounce, or just wing it and make it look/ feel right?

[John K Jordan]

When makeing shot glasses do you calculate the volume to hold an ounce, or just wing it and make it look/ feel right?

Hey Mike, I haven't made a shot glass but your question reminded me of the method I used to get the volume right when carving some coffee scoops: I filled the scoop that came with the coffee maker with silly putty then hollowed the bowl until the silly putty just fit. This method should work nicely for a turned or carved wooden shot glass, scoop, teaspoon, measuring cup, etc.

(We've used one of these every morning since 2007.)

coffee_scoops_PB010307sB.jpg coffee_scoops_PB044022comp_s.jpg

JKJ

[Stevan Hopkins]

Mike, in this case, my brother likes to sip his whiskey in a small shot type glass, so I just wung it. (Wung it is past tense for wing it...right?)

[John K Jordan]

... so I just wung it. (Wung it is past tense for wing it...right?)

Well you got my curiosity up so I looked around a bit.

The answer I liked the best:

-------------------------------------------------------------------------------------------------------------
Is it wung it or winged it? What is the past tense of the phrase "wing it"? What is the rule here?

Winged it. You are analogizing "to wing" with various strong verbs like "to sing" or "to ring." But "to wing" is not one of those verbs.
Also, if it were one of those verbs, it wouldn't be "wung it"--it would be "wang it" or "had wung it." (But it still isn't.)
-------------------------------------------------------------------------------------------------------------

I kinda thinked that might be it. Or maybe I thunked it.

JKJ

[Frederick Skelly]

I wouldnt use anything on a shot glass and risk the potential contamination if the finish were to slowly dissolve over time. But that's just me and my amateur thinking. I'm very conservative with items that contact food.

Fred

[Bryan Lisowski]

Epoxy isn't a food safe finish. I don't know what else to recommend.

[Harold Balzonia]

Epoxy isn't a food safe finish. I don't know what else to recommend.

Why would you say that?

Epoxy resins are used to coat the inside of metal food containers – like canned food and metal bottle caps.

i wouldn’t recommend drinking epoxy from the bottle, but once cured it is completely inert.

[Bryan Lisowski]

Why would you say that?

Epoxy resins are used to coat the inside of metal food containers – like canned food and metal bottle caps.

i wouldn’t recommend drinking epoxy from the bottle, but once cured it is completely inert.

I have heard this from several people, it is more the chemical reaction and off gassing. Let's say you turn a platter and use epoxy as the finish, could you place fruit or cookies for a short time with no issues, yes, but drinking out of a glass over and over could cause issues.

[Prashun Patel]

Say what you will, I made a coffee mug that I epoxied. Over time the finish disappeared. I don’t know if that was from cleaning or erosion from the liquid.

Where did it go? Down the drain? Down my throat? Regardless, I concluded that wood vessels for liquid would be unfinished inside, and periodically Re burnished if someone else besides me was going to be looking inside it.

[Harold Balzonia]

Say what you will, I made a coffee mug that I epoxied. Over time the finish disappeared. I don’t know if that was from cleaning or erosion from the liquid.

Where did it go? Down the drain? Down my throat? Regardless, I concluded that wood vessels for liquid would be unfinished inside, and periodically Re burnished if someone else besides me was going to be looking inside it.

Cured epoxy softens with heat. It’s a terrible choice for a coffee cup or chili bowl or hot oatmeal dish etc.... room temperature drinks or cold drinks or cold cereal have no effect on the epoxy. It’s also a mistake to put epoxied items in the dishwasher....

as the epoxy softened, you probably drank it little by little and washed it down the drain. No big deal....