Results 1 to 6 of 6

Thread: Sharpening station for tormek t7

  1. #1
    Join Date
    Oct 2008
    Location
    montreal
    Posts
    11

    Sharpening station for tormek t7

    Good day guys ,

    i just wanted to share some pics about my tormek7 sharpening station .

    it measure 42in x 18in ,i made the frame from some left over wood in my little shop, birch ,maple , walnut.
    and i boutght a piece of granite where the tool sits, all my tools are on wheels base no choice small shop in my basement

    i use the porter cable dovetail jig for the first time , and i can tell you that it is easy to use and perfect results at first try...

    a couple of coats of teak oil will seal this project.


    to all have a happy holiday
    Attached Images Attached Images

  2. #2
    Join Date
    Feb 2008
    Location
    NE Connecticut
    Posts
    695
    Wow! Nice work. Puts my T7 station to shame...

    Thanks for sharing.


  3. #3
    Join Date
    Oct 2008
    Location
    montreal
    Posts
    11
    Thank you Brian Happy Holidays

  4. #4
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298
    Woah, that's some fancy cabinet work! Very nice. It would shame me to put it in my shop where it could see the other stuff there.

    I took the easy (lazy?) road and bought a couple of stainless steel tables for my lathe tool sharpening things. They have shelves underneath for stuff. I have way too much stuff.

    Sharpening_small.jpg

    JKJ

  5. #5
    Join Date
    Mar 2016
    Location
    Florida
    Posts
    1,950
    Very nice. I need to make something similar for my T8 and my rikon cbn setup to sit on. Thanks for sharing.

  6. #6
    John, you can never have too much stuff. . . . . . . .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •