After years of using commercial veneer for my Marquetry, I have committed myself to using more and more shop-sawn 1/16” veneer. I decided to accessorize my Agazzani 20” so as to make resawing more efficient and enjoyable. Basically a power feeder set up with out the motor. Without significant modifications to the BS table, I cannot mount a power feeder.

1). New Woodmaster CT blade
2). New Co-Matic roller fence
3). New Northfield manual resaw attachment
4). New Aigner Auxiliary outfeed table

The setup worked great. Very easy and accurate. I resawed to apx 1/8” then ran each through my Martin T45 with Xplane head using a 1/2 MDF sled. I actually am pretty amazed at the results. The planer gave perfect consistent results at 1/16”. I use metric settings on the planer and TS.

Sampling of veneers; Cedar, maple, poplar, Cocobolo, and Ebony

Certainly many ways of achieving the same results, but these upgrades significantly makes it easy.

185C7F40-A6F3-41CB-9481-5533CC109D0A.jpg74066D23-937B-49BE-9A47-7D2EC98FDD18.jpg83DD25D4-9E01-4882-BAFC-8305D98AF36F.jpg58FFB1AA-F5A6-488D-9CC7-6C46EBA7D0BD.jpg90A4AA43-C2C1-4085-BF48-F6379E6CDDE5.jpg