Quick question I haven't been able to find an answer to. I'm wiring up a new outlet from my panel to my shop, and to get there I have to go through a poured concrete wall. I'm going to run the wire through PVC in the wall and then I'd like to have it terminate at the outlet which is in a flush mount box. The panel is directly on the other side of the wall from where I want the outlet, so I'd like the conduit to terminate directly in the back of the flush mount box.
My question is: Would this pass code? Is there a special connector to use? My plan was to just leave the PVC about 1/4" long as it exits the wall so it extends into the box.