I'm building a new router table and bought a sheet of Formica for the top. I will be laminating two layers of 3/4 mdf for the top, and covering this with Formica. I've never used Formica, so I would appreciate some help on a few questions:

1. Am I better off making the top and installing the Formica on it, then cut to exact size on the tablesaw, or cut mdf to exact size then add Formica. I will be installing a hardwood edge all the way around .

2. Will a regular bearing guided straight router bit give me a clean cut on the formica, or do I need a specialty bit? I am planning to cut the opening for the router lift after the top is done .

Thank you for any advice!