I need to make a pastry/cutting board for the kitchen. The local stone shop has marble, quartz, and granite scraps on pallets out in the yard @$35 for a pallet load!
I plan to pick up some tomorrow and don't know what I will wind up with but most are 1 inch thick or more and the pallet I have my eye on has several pieces about 30" x 48". I plan to use my tile saw to somehow cut the larger piece into 25" x 25".
I then need to finish all the edges. I plan to use an angle grinder working wet. I hope someone can give me the steps on abrasives and polish.
Thanks,
Perry