So I pulled the trigger on a Centauro CO 600 today. Got the thing for a $1/mm .(600). It is in decent condition now,was working right up till I bought it.There are a bunch of little things to straighten out. 1. handle for the blade tracking is gone,guy welded a nut on the stud so he could use a wrench. 2. dust collection port is broken. The hinges on the doors are slightly bent,and it needs a good clean-up. If someone has a pic of the tracking knob/handle setup that would be awesome. Pretty much everything else is an hour or so at the shop. Also wondering if anyone owns this saw what blades are your favorites. I will be ripping and resawing some,but basically an all around workhorse to cut anything I can shove thru it. Van I now have four bandsaws at my shop ,is that enough ?