Results 1 to 2 of 2

Thread: Need some RDWorks Help

  1. #1

    Need some RDWorks Help

    Hey folks!

    I've currently upgraded to a Windows 10 computer, running CorelDraw 2017 (64-bit) and RDworks V8. RDworks and CorelDraw are working just fine. But I can't seem to change the size of the bed in RDworks. I've attached a picture and I'm referring to the values in the blue circle. And to be clear, I can type in new numbers, but then they revert back to the 600 and 400 immediately (as in I change the numbers, click off the area and they are back at the 600 and 400).

    Thanks
    Walt


    Untitled.jpg
    Shenhui G460 80W RECI
    LIAOCHENG RAY FINE RF-6040-90W RECI
    Corel X5 Technical Suite, Windows 7

  2. #2
    Join Date
    Dec 2010
    Location
    NW Arkansas
    Posts
    1,947
    Blog Entries
    1
    On EVERY thing about RDworks where you see a Read and a Write button, to change something, Turn on and connect laser.
    open RDworks and READ FIRST. Change your settings, and WRITE back to laser. Just the way it is. must READ into and Write back to laser to have it save.
    And those are in vendor settings I think. PassWord RD8888 should work.
    Woodworking, Old Tools and Shooting
    Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
    SFX 50 Watt Fiber Laser
    PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
    Powermatic 100-12 planer, Rockwell 15-126 radial drill press
    Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
    Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •