I'll raise you a Robinson
Of all the laws Brandolini's may be the most universally true.
Deep thought for the day:
Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.
This is just turning into another porn thread.
And then there is this "resawing" baby at Hearne...
IMG_2547.jpg ('Creeker Fred Vorhees standing in front of the monster)
The band...
CQVM4079.jpg
And the beast in action cutting a very large walnut log into 3" slabs
--
The most expensive tool is the one you buy "cheaply" and often...
Steiner’s are my favorite but I think Robinson very similar. The feeder on these type saw adjust quickly out to allow for ripping of wide and narrow boards. That is a feature I wish my Univer resaw feeder had. Steiner would be too much saw for my shop though.
E313B331-8D85-44E1-8037-A74AF823229A.jpg
C6463B03-9331-40CC-A675-7CEBD0C908E2.jpg
Here is a pretty neat horizontal bandmill
Of all the laws Brandolini's may be the most universally true.
Deep thought for the day:
Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.
Of all the laws Brandolini's may be the most universally true.
Deep thought for the day:
Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.
It’s a shop that builds doors, windows and spiral stairs. A jig for gluing laminated stringers.
I feel like I entered a donkey in horse race😜
Oddly enough I’ve seen quite a few of those machines for really low amounts. Like $1500-2000, which seems like nothing for such a large and heavy machine. Those had to be a fortune new. Then again, I guess the same can be said for just about any 30”+ bandsaw.
A new 36/40" vertical resaw built similar to the heavy duty Robinson and Stenner shown in this thread will run you 70-100 grand. A "better than new" refurb from a dealer that does them will run 15-25k. Some of the out of service machines can go for scrap price since the logistics to move them is a pain, plus they are quite a bit more complex than a standard vertical bandsaw, which is really a simple machine. Depending on how it is equipped a new vertical Northfield 32" saw will run from $14k to north of 25K compared to a 36" Minimax/Formula steel saw which runs about $12k.
Of all the laws Brandolini's may be the most universally true.
Deep thought for the day:
Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.
If anyone is looking IRS Auctions has a very nice looking Stenner 36" ST9 (fairly modern one) that looks in great shape and will likely go for a song. For the people that hate the logistics of big machines bought at auction (which means your name is not Darcy) the good thing is it being sold by Redmond in Georgia and they will crate and ship for you (for a price) so you don't have to jump through many hoops. If interested contact Redmond before bidding and get a crating and shipping quote to nail them down plus you can trust them to give an accurate assessment of the running condition. Not sure of the protocol for this type of auction so if anyone can't find it PM me and I will shoot you the link.
389801A.jpg
Of all the laws Brandolini's may be the most universally true.
Deep thought for the day:
Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.