Results 1 to 3 of 3

Thread: Feedback on Galvo Fiber Lasers

  1. #1

    Feedback on Galvo Fiber Lasers

    Looking for owners with experience / opinions / cautions...

    I am currently considering a galvo fiber to do Stainless and Brass Tags. Looking for a faster/better mark than we get with our Trotec Speedy 300 Flex 80w CO2 / 30W Fiber.

    Have looked at Tykma , Laserstar and Trotec Speedmarker.

    Would prefer US Based mfg / dist for support.

    Any insights? Thanks

  2. #2
    Join Date
    Aug 2006
    Location
    Suwanee, GA
    Posts
    3,686
    It all really depends on the mark you are trying to achieve - black or deep. A black mark is really only done with Cermark on a CO2 laser, and deep with a galvo fiber. Check out Jimani, they have great lasers and amazing support!

  3. #3
    Join Date
    Dec 2010
    Location
    NW Arkansas
    Posts
    1,947
    Blog Entries
    1
    I hate to say it, but I'd buy Chinese direct for fiber. Way cheaper than any US based and if you get from one of the reputable builders, not eBay, you have support for the warranty period. You can buy 2 or 3 even with the additional tariffs for one US. Just say'n.
    Woodworking, Old Tools and Shooting
    Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
    SFX 50 Watt Fiber Laser
    PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
    Powermatic 100-12 planer, Rockwell 15-126 radial drill press
    Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
    Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •