Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19

Thread: WTB - Robland sliding table attachment

  1. #16
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    6,562
    Quote Originally Posted by Paul Tubergen View Post
    Yes the top of the brackets bolted directly to the table. Adjusting was done with the pieces bolted to the bracket
    Bob, I noticed yesterday that the upper bracket of mine has wide slotted countersunk holes, obviously intended to fit a variety of saws. On the PM66 the threaded holes in the cast iron table top aligned at the very outsides of the slots. A bit of drilling could make it fit almost anything. In fact, if needed you could drill and tap the end of the table.

    Another idea - perhaps you could find a person who lives near the CL table in RI to go look at it. If it was near here I'd do it in a heartbeat!

    JKJ

  2. #17
    Hi. If you end up purchasing this table and you find that you’re missing some parts, keep my info. My x31 parts machine had the attachment parts and maybe other parts you’ll need.

  3. #18
    Join Date
    Dec 2006
    Location
    Madison, Wisconsin
    Posts
    287
    Thanks John....that's very kind....unfortunately, I don't know anyone out that way.

  4. #19
    Join Date
    Dec 2006
    Location
    Madison, Wisconsin
    Posts
    287
    Thanks Ron...will keep you in mind.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •