I just started building a new light duty, ply topped bench. I bought some bargain bin wood at HD and figured it's good enough for this. Well it is and it isn't. I was hoping to just throw it together but I took it apart twice because the top was so twisted. I finally broke out the big guns and removed the twist from the rails. Took all of 5 minutes for the one I did before going to work.
I wish I had taken a before picture of the twist but I remembered to take a shot of it after. My $10 Record #6 I found at a yard sale made short work of it.
20181114_081358.jpg20181114_081330.jpg