Hello all,
I could use some help. I recently finished restoring a 1950's 3 phase delta unisaw. I'm using a vfd to power it with single phase and it works great.
I'm tired of using the tiny buttons on the vfd ro turn the saw on and off so I purchased a nice paddle switch to hook up to the vfd. Unfortunately I can't figure out how to connect it properly. The switch has four spade connectors on the back 14&24 for output, 13&23 for input. The vfd has 16 different ports for external controls.
Can anyone offer advice on how to properly hook the switch up? I'm attaching some pictures, ignore the exposed wires on the switch, that was just to test, I've since added crimped spade connectors
http://imgur.com/a/094uZvT