And on and on and on..
Building had no heat when I arrived this morning. Always eventful working in a old mill building. If the roof isn’t leaking, the elevator broke or now on the list the gas tuned off for whatever reason it’s something.
I used the time to break out the sandblaster and begin preparation of the machine internal parts related to the trunion, motor arbor blah blah.
F79E731C-7DDB-4FB7-BD6D-252D8DDA299D.jpg
That was soooooooo much more easy “and quicker” than the dai grinder and neeedle scaller.
I then tried to finish taking the motor apart. I got held up with one last lock ring. I need someone to get a screw driver under it as I compress it.
FEC00C9F-2DED-4F57-B6B2-2BAB459DB17C.jpg
At about 3pm the heat clicked back on. I was very happy as I woulda had to wait till next week to get the booth for a full day again.
Sealer time. I’d be lying to say I wasn’t enjoying using this autobody paint. The prep I’m doing is excruciating but the reward is outa this works. Very suiting to me as I like high highs and I’m also pretty accepting of low lows or just plowing through suck.
840E4498-44B1-4485-A85C-D1CD0BFE621A.jpg
This stuff just laiz down and flows on. It’s just awesome. I’m still fighting particulate. I’m gonna try and wet sand and buff a piece form last week and see what I get.
7404621E-E064-4212-A489-8CB499B6DE95.jpg
7E171667-EF46-43D0-8A07-1E642134A710.jpg
This piece will have to be redone as the depression will wreck my head forever.
A90E3FC5-6B33-41BD-8007-224DF5816BDC.jpg
This is what I expect,
BFCDE5DB-9D52-4147-A719-1D9C442FA273.jpg
CF6AC113-8CB2-4ED3-AD6F-52313C33B03C.jpg
Ok dinner then some color..