Results 1 to 7 of 7

Thread: Corel to DST

  1. #1
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    3,882

    Corel to DST

    is there a way to design in corel then save as DST file some how?
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  2. #2
    Bert
    You might try saving it as an EPS in Corel then send it to whoever needs the DST. I'm not sure of this but it's worth a try.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Woodworking shop CLTT and Laser Sublimation
    Evolis Card Printer
    CorelDraw X5

  3. #3
    Join Date
    Nov 2006
    Location
    Maple, Ontario, Canada
    Posts
    938
    Bert,

    If this is for embroidery process than you need a conversion to stitching process.
    This takes skill and time to get it optimized.
    People in the field should be able to get your PDF format and convert it to what it needs to be.
    Trotec Speedy 300 - 60w, with Quatro CSA-626 fume extraction
    Xenetech 1625 x2,
    New Hermes TX pantograph, CG4 cutter grinder
    Brady Globalmark2 label printer,
    Assortment of custom tooling , shears & punches, heat bender.
    Software: Xenetech XOT, Corel X3, Bartender label software

  4. #4
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    3,882
    sorry bout the delay was thinking about a machine to do patches b ut decided not to. I WANTED TO DESIGN in corel then send to embroidery machine
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  5. #5
    Bert
    You might look into this. I haven't tried it.

    https://en.freedownloadmanager.org/W...DRAW-FREE.html
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Woodworking shop CLTT and Laser Sublimation
    Evolis Card Printer
    CorelDraw X5

  6. #6
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    3,882
    Thanks Mike ,I read all the info tried to download the software but kept going in circles, hit download takes you to another page hit download takes you back to previous page. Kinda strange
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  7. #7
    Bert

    if you just want to make holes in patches I believe the "blend" feature in Corel will do that. I have used that feature only once or twice in over 20 years so I can't provide a tutorial but Roy Brewer is a Corel master and he has a tutorial. https://www.youtube.com/watch?v=7okFhgHzOaw
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Woodworking shop CLTT and Laser Sublimation
    Evolis Card Printer
    CorelDraw X5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •