I'm having trouble getting the PSA off my disks when it's time to replace the film. I tried mineral spirits and acetone, but neither had much effect. Does anyone have suggestions what I might try next? These disks are aluminum. Thanks. Eric
I'm having trouble getting the PSA off my disks when it's time to replace the film. I tried mineral spirits and acetone, but neither had much effect. Does anyone have suggestions what I might try next? These disks are aluminum. Thanks. Eric
I have never tried this, but was told once to put them in the freezer for a bit and the glue will come off easier. Worth a try.
My Dad always told me "Can't Never Could".
SWE
On my ROS, I've found that the disks come off easier if they are warm. Try warming your disks either through use or with a heat gun/hair dryer set on low.
Lee Schierer
USNA '71
Go Navy!
My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute