This would be a better title:
“Shop closing, too many employees diagnosed with lung cancer.”
This would be a better title:
“Shop closing, too many employees diagnosed with lung cancer.”
You obviously don't want to purchase their dust collection system.
Lee Schierer
USNA '71
Go Navy!
My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute
I have seen this to the point I had to do a double-take to be sure it wasn't the same shop. Sawdust was caked in the saw like presswood. This shop had the on/off switch on the saw wired backwards-red on, green off. I helped them fix their issues and then ran like the wind away from it.
Running a saw like that without DC, it wouldn't take very long to get it to that state - a stack of MDF ripped up would probably do it.
40 years ago a neighbor had an ancient 36" planer that was flat- belted to a tractor PTO. He ran it outdoors with no dust collection - he would drag the thing 10 yards or so when the pile got too big.
I will never understand ads like that, and I see a lot of them. Tools that are rusted, caked with dust, piled high with junk, things that could easily be fixed and would sell for more money, the pictures just show misuse and abuse. And the prices are never low It's like why didn't you clean up first? Aren't you embarrassed to operate like that? You ought to be!
I don't know what you are talking about.
jointer.jpg
They want $300 for it.
I have been following the price of lathes on CL. I got two good deals in 5 years. Missed another two because I waited till 9 am to call. I see old rusted Craftman two tube lathes without motor and the asking price is over $300. Rust=vintage=extra dollars,,, I guess. Or a Central machinery lathe with a set of cheapest chinese knives possible for $750. Are these folks just that stupid, or is there some sucker out there that I have not met. I ran a set of tractor chains on CL, one guy responded by email and asked if they were good for pushing logs. (?) My step son, had a camping trailer with a leaky roof and mushy floor. He paid $250.00 for it. Used it for a month and ran it on CL. He sold it for $2,300. He never even fixed it. I did miss a good one a few months ago. Somebody actually had one of the original stone Mason Dixon Line markers, quarried in England and put in in the 1700's during the famous survey. They wanted $25. It was gone before an hour was up.
As an obscure aside, in the utility industry (Electrical transmission and distribution) red is on and green is off. After 28 years in the field I push the green button on my tools to try and shut them off at least once every time I am in the shop. I have actually considered re-wiring all of my machines as it would be safer for me.
It's not that obscure John
I've worked in nuclear power plants for almost thirty five years and know exactly what you mean.
To the OP
I've also seen adds like that, and it just kind of makes you wonder.
There was one recently for an Oliver 166 that was in pieces, lying in the dirt, with rust bloom. I thought the person selling would have been more successful had they cleaned it up a bit, assembled it, and took a better picture. I'm sure it sold though.
"The first thing you need to know, will likely be the last thing you learn." (Unknown)