Results 1 to 2 of 2

Thread: Peel and stick floor

  1. #1
    Join Date
    Apr 2017
    Location
    Michigan
    Posts
    2,769

    Peel and stick floor

    It's been a few months since I installed a peel and stick floor in my shop (Armstrong, white). This is inexpensive and pretty easy to do, except that I had to move everything in the shop and that tool chest was difficult. There are a couple of small scars but I would have to search for them, and one small stain. Paint comes right off. Durability could be a problem but repair is easy enough.

    So how do I like it? I like it a lot. Things slide around easily, dropped things are not damaged and cleanup is way easier. And the shop is brighter and a nicer place to spend time.

  2. #2
    If you like peel and stick tiles you should look into "click" vinyl flooring. Its a floating floor and goes together fast. I installed some in my quilting room. So far the only issue I have had is that heavy loads on wheels move just fine unless they have been sitting there a few days. Other than that they have worn very well!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •