I know, I have been searching through the forums looking at bandsaw blade likes and dislikes and I am all messed up now. I looked on timberwolf site and others and I have been using timberwolfs 1/2 3tpi for green. I noticed they have a 3 and 5 blade packages but I do not know how their other blades perform. There are so many blades out there I am turning to you guys to help here. What I am looking for. I just bought a laguna 18bx after selling my little 14 cast critter. I gave all the blades to the new owner so I am starting over in blade supply. I want a good solid resaw blade. wide, narrow, carbide what are your suggestions. I did have a woodslicer on my little 14 but my only complaint was it did not stay sharp very long. I will consider the carbide but would also like to know how or where to send it to get it sharpened. Maybe this isn't possible please let me know. Next is a good green wood blade and then a curvy capable blade. Maybe more but what do you folks think is a good set up for all the things bandsaw do. I would like to get a specific set of blades like 3 or four types but I do not want to have 12 different blades if you can get my meaning. I do not have a jointer or a tablesaw and just a lunch box planer, so I use bandsaws often. I have a lathe the rest is hand tools. Most flat work I do is smallish items so a good resaw finish equals saved time with the planes. Thanks folks