When I was at the big orange lumber store I noticed an air pump device for raising base cabinets for leveling. I ordered a couple small trailer tire innertubes, removed the stem valves and connected them to a hose with one valve. Two sheets of plywood and some twine to keep them aligned. The bowl blank weighs about 80# and was about 1” below spindle height. Shoot a little air in the valve to raise it above the center height. Then I released a small amount of air to bring it back to center. Turn the hand-wheel and started threading it onto the spindle. There are many other ways, but I have limited space and this is easily stored.

343A4F60-15CE-444D-A016-5110E4A1D798.jpg A986194E-807D-414B-9D08-146F3AFC877E.jpg 291CC29D-DE72-4287-ADFC-77BBD42F0375.jpg 61C09E64-1889-44CB-9354-337E9B4497EB.jpg