-
I epoxied with chips and clear coat my advance T&G OSB and it was the best thing I did. Glue drips pop right off after drying. Spills wipe up. I have a 24x32 shop I built and all I did was filled all the nail holes,joints and belt sanded the entire floor. The only issue is I did a minisplit a year after and I had cracks appearing around the 4x8 sheets as it pulled the moisture out. I went from 70/80% humidity to 40/45% in 24 hrs of turning it on. Not a big deal. It's been over 5 years no chipping of pealing yet.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules