Bandsaw noise help!!

[Bill Orbine]

"Only happens under tension"...... With such a short video I'm guessing it's the new blade. Perhaps there is a kink or thick weld in the blade that the noise is made at the blade guides. I hear two hits. Upper and lower guides, maybe?

[Roy Petersen]

Don't know if this will help, but I had a similar noise on my band saw after a blade broke. It ended up being the tension indicator behind the wheel. It had gotten slightly bent just enough to hit the wheel. Took me a while to find it.

From that noise, I'd say this is very likely the cause if there's one in there.

[Chris Parks]

Don't know if this will help, but I had a similar noise on my band saw after a blade broke. It ended up being the tension indicator behind the wheel. It had gotten slightly bent just enough to hit the wheel. Took me a while to find it.

It could be that also but whatever it is seems to be chassis related and not band related as the noise has that type pf sound.