Results 1 to 5 of 5

Thread: Google help Maytag Dryer

  1. #1
    Join Date
    Jan 2004
    Location
    Fredericksburg, TX
    Posts
    2,576

    Google help Maytag Dryer

    I found one of the internal tub blades loose yesterday about 5:30pm and promptly proceeded to tear into the dryer to try to get to outside of drum to tighten screw. I quickly found out that there is no access from back. Going to Google for help, I found several U-tube videos on repair of Maytag dryer and found out that access is from front. About 15 minutes later, I had front panel and top removed and could rotate the drum to tighten the loose holding screw. Total time less than 1 hour start to cleanup. Definitely better than a service call. Surprising the help out there now. Just got to remember to check out some of the procedures before running at the problem.

  2. #2
    Join Date
    Apr 2013
    Location
    Okotoks AB
    Posts
    3,499
    Blog Entries
    1
    It is amazing the amount of appliance repair help on the interwebs. I fixed a Maytag washer the needed a $250 circuit board for the grand total of less than $3.00 in parts & about 10 minutes with a soldering iron. Later that same front loader had a bearing go bad. Maytag would only sell me a $600 outer tub assembly. The internet told me how to fix it for $60 worth of bearings & seals (& those were premium quality bearings). That repair took about 1.5 hours. I've since sworn off Maytag laundry equipment.

  3. #3
    Join Date
    Mar 2006
    Location
    SoCal
    Posts
    22,510
    Blog Entries
    1
    Like the woodworking forums, the appliance forums offer tons of help with fairly simple (once you know the process) repairs. I will keep fixing my old Kenmore / Westinghouse machines. They have outlived three sets of the new front loaders (LG, Samsung and some other) that my relatives have been through. A curse of living in another time. I can't spend upwards of $1000 for a washing machine that only last a few years.
    "A hen is only an egg's way of making another egg".


    – Samuel Butler

  4. #4
    Couldn't agree more. I have found a video on repairing a 30 year old shower faucet (down to the specific model), videos on simple electrical work, owners manuals, parts diagrams, alternate sources for replacement parts and countless how-to videos for woodworking.

  5. #5
    Join Date
    Dec 2005
    Location
    West Lafayette, IN
    Posts
    6,530
    Agreed! I’ve fixed our washer (twice), dryer, and dishwasher using appliance repair videos. And I guess hot water heaters fall in that same category.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •