Results 1 to 4 of 4

Thread: HF Media Pot?

  1. #1
    Join Date
    Mar 2018
    Location
    Central PA
    Posts
    214

    HF Media Pot?

    I purchased the HF blast cabinet and two of the pressurized media pots. I'm pretty sure I read that the pots should be cleaned of any oil, etc before adding the media but I was unable to pull that up with a search. If this is in the wrong place please feel free to move and will appreciate any input! Everyone have a good day

  2. #2
    Join Date
    Aug 2006
    Location
    Suwanee, GA
    Posts
    3,686
    I have used several of the HF pots over the years and never cleaned a single one of them before using - they all seemed to work fine for me and I did A LOT of sand carving. The only modification I made to them was to extend the pickup tube inside so that it would be less likely to clog. Other than that, bought 'em, filled 'em, blasted stuff.

  3. #3
    My experience was the same as Gary's.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Gravograph IS400
    Woodworking shop CLTT and Laser Sublimation
    Dye Sublimation
    CorelDraw X5, X7

  4. #4
    Join Date
    Mar 2018
    Location
    Central PA
    Posts
    214
    Thanks guys!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •