Can anyone recommend a good book/video/tutorial on frame and pane door making for cabinets with hand tools only?
Can anyone recommend a good book/video/tutorial on frame and pane door making for cabinets with hand tools only?
Last edited by Brian Eaton; 09-19-2018 at 12:40 AM.
Sellers has a very detailed 4-part series on YouTube detailing frame and panel. His blog post has a link to the videos.
https://paulsellers.com/2016/09/maki...-tool-methods/
Here's a great article/tutorial by Sean Hughto: http://www.inthewoodshop.com/Furnitu...el%20door.html
Regards from Perth
Derek
Or..wait about a week or so..as I have two such doors to make...for that Project I am posting about, lately......I need two such doors made, they will be out of Ash. Mortise and Tenons. MitreBox to make the shoulder cuts...backsaw or wide chisel for the cheeks. Grooves to house the panels will be with a plane....will use haunch tenons as needed. trying to decide whether a raised panel should be made...using a #4 hand plane.
Welcome to follow along...
corner details.jpg
From another door build..also in Ash
Dry fit 3.jpg
Haunched tenons at the corners.
Stanley 45 rebate.jpg
I can use either the Stanley 45, or the Stanley 78 to add a rebate around on the inside.
assembled.jpg
Stepback Cupboard, delivered and assembled. Has two doors.
Last edited by steven c newman; 09-19-2018 at 10:52 AM.