Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18

Thread: Grizzly 16" Jointer Review- G9953ZX

  1. #16
    Join Date
    May 2012
    Location
    Central New Jersey
    Posts
    56
    Quote Originally Posted by Van Huskey View Post
    FYI there is no tariff on this jointer since it is made in Taiwan.
    Yes I am aware. I never claimed that this item was effected by the tariff. I mentioned it to provide context.

  2. #17
    Join Date
    May 2012
    Location
    Central New Jersey
    Posts
    56
    Quote Originally Posted by Tom Bender View Post
    Ok I'm not familiar with those big jointers and the picture brings up a question about that round rack gear. Does it get jammed with chips?
    The dust collection is adaquate. Sometimes, I forget to turn on the dust collector, or I fail to open the correct blast gate. That is why there are chips in that picture.

  3. #18
    I got the 8" version of that jointer back when they still made it. It was a good machine. The straight knives were a little fussy to set and IIRC, I broke the fence adjustment handle. Overall good experience with it though. We had it set up with a feeder for edge jointing and moved the fence/feeder forward to fresh parts of the knife as it got dulled. Only got rid of it when the process changed.
    JR

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •