Thanks for all your help. I definitely have lots of things to try. I also reached out to my local UL dealer and he told me to check that my machine is in focus. I will let everyone know what I tried and what the results are.
Thanks again
Thanks for all your help. I definitely have lots of things to try. I also reached out to my local UL dealer and he told me to check that my machine is in focus. I will let everyone know what I tried and what the results are.
Thanks again
Hmmm, couldn't load/see them in x6
That +10% thickness apect of acrylic hit me as a surprise when I bought two sheets of 30mm stuff to rout and laser for a job - and then started the 2nd sheet, and after putting the letters beside each other I could not figure why one was nearly 1/8" thicker than the other - to be told that up to 33mm thickness is to be expected as industrty standard on 30mm sheets.
Best wishes,
Ian
ULS M-300, 55w made 2002 with rotary. Goldenlaser 130 watt, 1300x700 made 2011.
Flat bed 2500x1300 150/90watt 2 tube laser, 2018 model.
Esab router, 1989, 4.5 x 2.0 m, conv. to Tekcel, and modded a 2nd time.
HP L260-60". Roland PNC-1410. Mimaki GC-130 SU.
Screenprinting carousel 6x4 and 7x4 ft 1-arm bandit vac table.
Corel Draw X3, Illy, Indesign & Photoshop CS2 & CS5, Enroute 4
Pencil, paper, paintbrush, airbrush & dagger-liners & assorted other stuff.
I just tried it in X7: copied the .gms files to ProgramFiles/Corel/…/Draw/GMS and restarted X7. Load a drawing, select Tools/Macros/RunMacro, then click on the 'Macros in..." dropdown and select the one you want. I seem to recall in earlier versions all the installed macros showed up under RunMacro, so for no apparent reason things have gotten harder.
If it's something you use a lot, I suppose the right answer is to create an icon for it and install in in one of the toolbars.
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
IIRC, there is something changed in X7 that makes its macros incompatible with earlier versions, or maybe it's vice versa (or both)...
I just tried the ProgramFiles/Corel/etc.... location as well as <user>/AppData/Roaming/Corel/CorelDRAW.../Draw/GMS, and X6 couldn't read the file in either location. I think it is an incompatibility between older and newer versions of the program.
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
Lee, thanks for posting that!
700mm x 500mm Ke Hui KH-7050 Laser
80W EFR F2
S&A CW5000 chiller
Chuck style of rotary attachment