Who cares if it's sealed, can't void a warranty that doesn't seem to exist! pull the cover and check all the connections.
Who cares if it's sealed, can't void a warranty that doesn't seem to exist! pull the cover and check all the connections.
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now - fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Yep, Check top (behind the head) cables also, I had one come a loose when I moved the laser.
I'd change all my cables also. I have a cheeep 3D printer. Came with a 24" USB cable to connect to PC. Didn't work. Tried 3 other cables before I found one that actually worked. Some machines are really particular.
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
SOLVED - I went threw the process of elimination and determined that the issue resides in the Y-Axis Galvo, The motor seems to fault out after about 2-3 minutes of run time. Trying to find a replacement now
if there's any way possible to borrow a scanhead before buying one, definitely try that- best scenario is to get the seller involved since it's a warranty issue (I'm assuming)
I've found over the years that something like that mirror not moving may not be the mirror-- since each mirror is controlled by its own wired connection, could be the wire or connection or the data flowing thru it isn't right. You're likely right, but Murphy's law is always in full effect... at least around MY place
Other scenario would be to have your scanhead checked locally first, all it takes is another fiber laser to plug it in to. If it's bad, it'll be bad when tested elsewhere...
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now - fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle