Thanks for the kind words Vincent. The lens being used was salvaged from an old projector lens. My brother used to do a lot of salvage work and gave me this and another lens. Both of them have been very useful over the years. The other one is flat on one side and was used mostly during my coin collecting days. It could be set on top of the display cases dealers used at coin shows to view a coin without having to have it removed from the case.
jtk
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
Some of Steven
My primary wood is pine or fir, so that was what was used. My last project in a true hardwood was a saw handle.
My old wide screwdrivers are saved for what they were intended to do, turning large threaded fasteners. Besides they do not hold an edge well.
Many of my "beater" chisels are fine chisels in their own right. They are not treated like junk. Like the Aldi chisels many of them have tall lands that do not play well when one wants to make clean looking dovetails.
None of my chisels are treated like junk. My name for my unassigned chisels may be misleading. Some of them are stout enough that they can survive being driving with a small sledge, hence the beating some of them can take is what gave them the name.
My Sandvik chisels reside in the "beater chisel" drawer, but they are not "beaters."
The Aldi 8mm chisel will not do a good job of cutting a 1/4" dado, unless one doesn't mind something rattling in the dado. Maybe we could buy a few sets and grind them down to the sizes we need. (or we could buy them from a maker who puts a little more effort into controlling the size of their product.
My paring chisels are seldom driven with a mallet. When they are, they are not struck hard, they a lightly tapped. If a mortise is to be cut, my preference is a mortise chisel. If a person feels better chopping a mortise with a bench chisel that is their right. My paring chisels have bevels in the 15-20º range. Not good for beating through a knot or other obstruction.
This is the reason for my preference for socket chisels. My right hand has an old injury that makes many handles very uncomfortable. My solution is to make my own handles.
When one is out to hunt bear they do not arm them self with a small pocket knife. When one wants to make tight fitting dovetails, one doesn't use a mortising chisel. When there is chisel work to be done on a stump, railroad tie or other piece that may have imbedded nails and other hardware, my paring chisels could do the work, but my sensibilities tell me a stouter chisel will not only do the job better, but will likely suffer less edge damage due to the higher bevel angle. Some of my "rough work" chisels have a bevel of 35º.
Just like when a person wants to go on dirt roads and do some hill climbing they do not take the family Cadillac, they take the 4WD. "Oh no, the Cadillac must be an inferior product if it can't take on a few hills and a little mud." Yea Right. The same person will not likely arrive at a social event in their mud spattered Land Rover.
What is the lament of so many who prefer a new plane over an old Stanley/Bailey? Oh yea, my time is more important to me than what it costs to buy something that works right out of the box.
One part left out of my post on using the Aldi chisels is being able to cut it with an old auger file. So maybe if the mismatched bevels and high lands on these chisels bothered a person, there is a solution. Hours at the bench taking off a bit of metal. The other solution would be to seek out chisels that were already made with proper attention to such details. If they are good, they likely hardened it to where most files will roll right over the metal.
One thing that is likely to change is the cost of these if they are affected by the new tariffs. Maybe they will remain less than $10 for a set.
Another seems to be these are often reported as being out of stock. Guess those dovetails can wait until they get more in stock?
Yes, if one wants a set of chisels to show off in their shop Woodcraft has a nice boxed set of Tasai Damascas Pattern Blue Steel Multi-Hollow Back Chisel Set priced in the $4,000 range.
There are many choices in between the Aldi and the Tasai.
My focus on attention to detail in my work can become distracted if the tool in my hand is not comfortable, if the metal is abrading my fingers, or if it is of the wrong design for the job at hand.
jtk
Last edited by Jim Koepke; 09-22-2018 at 12:10 PM.
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
Simon, Thanks for the kind words.
There are ways to cut the cost of a product and have it still be usable.
Many folks will find a set of Aldi or even Windsor chisels are all they need to enjoy making things of wood. There are other folks who will enjoy lightly caressing the surface of their very special chisels purchased from a legendary blacksmith via a serpentine channel of connections. Some of us have a feel or impression of where our tools have been. This sensory engagement in one's mind may add to the enjoyment of fitting a tenon to its mortise. Their choice or evangelical fervor will not bother me.
When one considers the difference between the different sets of chisels on the market, there is a lot more to consider than price alone. Remember John Ruskin:
In this case one may think of exchanging the phrase, "a little less finished" for the word "worse."From John Ruskin Quotes. There is hardly anything in the world that some man cannot make a little worse and sell a little cheaper, and the people who consider price only are this man's lawful prey.
The Aldi chisels would require a considerable amount of work if one wanted lower side lands. Smoothing the sides for a better feel would be another time consuming task. The sizing might be a problem. Without doing a survey of others with chisels from various batches there is no way of knowing if they are of consistent size or if they vary from batch to batch or even in the same batch.
There are many folks who like the order of having matching handles on their tools. That is as good a reason as any for wanting a better set of chisels. For me, having matching handles in a set is not an important factor. Besides, with my turning skills it amazes me to have two handles turn out the same. Most of my handles are made out of different woods. It makes it easier to pick the chisel by looking at its handle.
Some folks like the look of bronze planes on their shelf as opposed to a gathering of Stanley/Baileys with a century of patina.
We certainly shouldn't get angry or defensive about our choices or the choices of others.
jtk
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
A proprietary gold alloy hardened to Rockwell 64!I think there's a typo there: "blue steel" should be "pure gold."
jtk
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
I bought mine just for the *hunt*.
But, I may turn them into tree hanging poster stickers. I'll have to touch em up first, and try them out. Lol
Just saw this posted by Paul Sellers a couple of weeks ago on the internet:
"For 8 years I've recommended Aldi four part chisel sets because they were just excellent. Nice handles, good, good steel, easily refinable and 4 chisels for £8 the set. And now they've done this. No more recommended! Junk!"
Apparently he changed his mind and recommendation after seeing the rubber handles.
Simon
Rubber?? Hmm. All I've seen are wood.
Someone suggested that he get a set and change the handles...his response:"not interested. They are too thick and ugly."
The usual Sellers' style.
May be the future shipments from China will all be rubber handles...so (to those who are interested) better get some before it is too late.
Simon
Last edited by Simon MacGowen; 09-23-2018 at 8:40 PM.
other chisels.jpg
ymmv
Yes, that is a fascinating job you did on those.
My choice was to purchase chisels that were already beveled.
Fettling mettle does give me pleasure, but sometimes there are limits to how much effort will be spent. Most of my filing on wood tools is saved for saws and an occasional plane's mouth.
jtk
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
I have to wonder how many sets of premium chisels could have been purchased with the aggregate time in dollar value expended on talking about cheap chisels.