Hi folks.
I decided to put in a 20' channel drain along the front of my new shop. Both Menards figured 18 bags for 4" wide by 4" deep section on either side and, although there will be no vehicular travel over it I want to set it on top of about another 4" deep section.
I don't think mixing 18 60lb bags by hand in a wheelbarrow would give me time to properly dress it. so I got to looking at their 3.5 cu.ft direct drive mixer for $320.
Anyone have that unit or is there a less expensive model that would do the job.
3.5 cu ft seems almost perfect for the 8 cu ft totall without breaking the bank.
Anyone wish to advise me? Harbor Freight mixer any good? Any other models you'd recommend I look at?
At the moment something in that price range seems ideal as well for me. I have no other plans for it now, but there are some areas where I'd like concrete....a slab in front of a smaller shed, a new sidewalk and so forth.
Besides, my 2 daughters live very close by and both they and their spouses could probably need one from time to time. Beats renting for $60 + and having nothing when I'M
done.
Or would a bit more money buy me something much better.

Thamks for reading this.