Results 1 to 8 of 8

Thread: Edge Profile Using CNC

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 08-31-2018, 5:29 PM #1
    David Justice
    David Justice is offline [OP] Contributor
    Join Date
    Jul 2016
    Location
    Greensboro, NC
    Posts
    127

    Edge Profile Using CNC

    Hi,

    I have designed a plaque in Fusion 360. It is a Celtic cross with many corners and curves. It needs an Ogee profile all around the outside edge. So, I have 2 questions.

    1. Is it best to design the profile and cut it with end mill/carving bits, or use an Ogee profile router bit? I would rather use a profile bit.

    2. If I was to use just a profile bit, how would the toolpath work? I'm having trouble envisioning this?

    Thanks!



    Screen Shot 2018-08-31 at 5.27.44 PM.jpg
    Attached Images Attached Images
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules