Wood ID suggestions requested

[Phil Mueller]

Trying to get something close to the front accent panels on this table...

B217E0D9-3857-4E5B-A73A-5CAA61389054.jpegC7678A50-6A5F-4CF1-82B8-85B02A9C20EF.jpeg

I understand it might be lighting, stain, whatever, but would anyone care to venture a guess as to what that yellowish/amber/figured wood might be...or something that could look similar? If need be, I’ll default to quilted or ribbon maple, but before I spend $ on veneer, I’d appreciate any guesses.

Thanks for any suggestions!

[Andrew Hughes]

My guess is Satinwood or yellow heart.
Good luck with your build if that’s the piece your making.

[Phil Mueller]

Thanks Andrew. I’m using this as a sort of design guide for a mahogany display stand. I’d like to replicate as close as possible that wood for the drawer front and leg inlays.

[Bryan Lisowski]

It might also be figured maple, either laminated or veneer.

[johnny means]

My first guess would be a maple burl, maybe olive ash.

[Phil Mueller]

Thanks all! Comparing your suggestions to what is available from veneersupplies, I think the maples and the olive ash will probably fit the bill. Also looking at Avodire crotch....yellow/amber tone and good figure.