We just set the angled top cabinet for the entertainment center. It was a bear to get it to sit right. I'd like to make something that would both support it and make installing it easier. This is what I have right now:
To set it flush on top I screwed in some cleats. The gap between the cabinet and bookshelves is one thickness of 3/4" plywood.
Problem with this is the back of the cabinet has no support so it drops down.
So I put in some temporary braces to level it out and that fixed the leveling issues. Even if I made walnut braces, it would look like the after thought it really is.
For hanging the cabinet I could permanently install walnut cleats to the bookshelves and to the wall, if there's a stud there but I'd rather make something more visually pleasing.
Any ideas?