Ray arrived Thursday about 9 with my new laser. I spent several hours yesterday seeing what others told me.....This will take a while Oh well, I need something to do this winter. 20180816_203123.jpg
Ray arrived Thursday about 9 with my new laser. I spent several hours yesterday seeing what others told me.....This will take a while Oh well, I need something to do this winter. 20180816_203123.jpg
Congrats, now the Fun begins.
Enjoy,
Scott
Rabbit Laser RL-60-1290, Rotary attachment, Corel Draw x6, Bobcad Ver 27
Juki-LU 2810-7, Juki 1900 AHS, Juki LU-1508, Juki LH-3188-7, Juki LH 1182
Sheffield 530 HC webbing cutter
I have a Rabbit too but mine sits on the floor not mounted to the wall
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Bert's right. They work better horizontal.
Congratulations.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Congrats on the new Rabbit! (forgive me for taking the liberty of dismounting it from the wall )
rabbit.jpg
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now - fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
That was an option, Ray spent an extra 2 hours making that happen. LOL.
Good looking machine, Keep off the wall and Enjoy!
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
Today is the one week mark. As expected it's "one step forward and two steps back" but it's progress none the less. I rec'd my sales tax permit yesterday so now I can consider setting up some vendor accounts although that may be a little premature. My nephew has a small craft show/cider festival in October but I doubt I'll be ready for even that Oh well. Thanks for all the encouragement
Craft shows may or may not work for you. Usually unless the people running it rule otherwise it may be filled with cheap Imports and very few real crafts from local people. Visitors come and look, very few buyers but having your business card out with your website and email will really help future sales.
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10
Look like a good shop and machine. Enjoy.
I have the 1290, if you have any questions (I can answer), fire away.
Thanks Brian I'm sure I'll have tons of questions!
[I]'ll second Brian I can answer ?'s if you need help
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander