Results 1 to 14 of 14

Thread: Grizzly G0441 3HP Cyclone Dust Collector - Boston MA

  1. #1
    Join Date
    Mar 2007
    Location
    Norwell, MA
    Posts
    13

    Grizzly G0441 3HP Cyclone Dust Collector - Boston MA

    Used only in home shop. Very little use - probably less then 2 weeks equivalent commercial use. Has not been used in the last 4 years because I don't have the ceiling height in my house. All parts are there including wireless remote. It pains me to sell this but I just can't make it fit. I also have ducting available for additional cost (see pictures of it setup.) This setup with the factory metal stand would cost $2,198 shipped new from Grizzly.

    $1500

    Located 30 minutes south of Boston, MA

    Click image for larger version. 

Name:	IMG_20180811_160852.jpg 
Views:	138 
Size:	78.8 KB 
ID:	391704Click image for larger version. 

Name:	IMG_20180811_160903.jpg 
Views:	122 
Size:	162.7 KB 
ID:	391705Click image for larger version. 

Name:	IMG_20180811_160931.jpg 
Views:	105 
Size:	64.5 KB 
ID:	391706Click image for larger version. 

Name:	IMG_20180811_160916.jpg 
Views:	97 
Size:	68.2 KB 
ID:	391707Click image for larger version. 

Name:	IMG_20180811_160911.jpg 
Views:	130 
Size:	116.5 KB 
ID:	391708Click image for larger version. 

Name:	IMG_20180811_160858.jpg 
Views:	112 
Size:	178.3 KB 
ID:	391709

  2. #2
    Join Date
    Mar 2007
    Location
    Norwell, MA
    Posts
    13
    Open to reasonable offers!

  3. #3
    Join Date
    Mar 2007
    Location
    Norwell, MA
    Posts
    13
    Price reduced: $1300

  4. #4
    Join Date
    Mar 2007
    Location
    Norwell, MA
    Posts
    13
    Price reduced to $1200

  5. #5
    Join Date
    Mar 2007
    Location
    Norwell, MA
    Posts
    13
    Price reduced to $1100

  6. #6
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    3,106
    I have had good luck selling on Facebook Marketplace, you might try. If I was closer I would purchase right away. Good luck.
    Retired Guy- Central Iowa. , Ray Fine 20w Galvo Fiber laser (SOLD) , LightObject 40w CO2 Laser and Chiller, MakerGear M2 3D Printer. Qe60+ Vinyl cutter. Fine Line Automation 4x4 CNC Router

  7. #7
    Join Date
    Mar 2007
    Location
    Norwell, MA
    Posts
    13
    Thanks, I have it on there as well.

  8. #8
    Join Date
    Mar 2007
    Location
    Norwell, MA
    Posts
    13
    Bump Bump Bump Bump

  9. #9
    Join Date
    Apr 2009
    Location
    Northern New Jersey
    Posts
    59
    What is the height the way you have it setup?

  10. #10
    Join Date
    Mar 2007
    Location
    Norwell, MA
    Posts
    13
    Total height is 93". I had it setup so the motor was between two floor joists so height without the motor is 80"

  11. #11
    Join Date
    Mar 2007
    Location
    Norwell, MA
    Posts
    13
    Bump

    Bump

    Bump

    Bump

    Bump

  12. #12
    Join Date
    Mar 2007
    Location
    Norwell, MA
    Posts
    13
    Price reduced to $1000

  13. #13
    Join Date
    Mar 2007
    Location
    Norwell, MA
    Posts
    13
    Bump

    bump

    buuuuuuuuuuup

  14. #14
    Join Date
    Aug 2013
    Location
    Cumberland, Maryland
    Posts
    269
    Always a bit too far away. GLWS !!
    You only need 2 tools in life. If it's supposed to move and doesn't... use WD40. It it moves and shouldn't... use duct tape.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •